What Other Hardware for Ubiquiti G3 Flex

• Contents
• Table of Contents
• Bookmarks

Quick Links

1080p Indoor/Outdoor IP Camera with

Infrared and 802.3af Back up

Model: UVC-G3-FLEX

  Also Come across for Ubiquiti UVC-G3-FLEX

  Related Manuals for Ubiquiti UVC-G3-FLEX

  Summary of Contents for Ubiquiti UVC-G3-FLEX

• Folio 1 1080p Indoor/Outdoor IP Camera with Infrared and 802.3af Support Model: UVC-G3-FLEX...

• Page 2: Bundle Contents

  Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Video Camera G3 Flex. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Package Contents G3 Flex Camera Indoor Mount Pole Mount Outdoor Comprehend Security Screw...

• Folio 3: Outdoor Installation Requirements

  • Surge protection should be used for all outdoor installations. We recommend that you use two Ethernet Surge Protectors, model ETH-SP-G2, one near the UVC-G3-Flex and the other at the entry point to the building. The ETH‑SP‑G2 will absorb power surges and safely belch them into the basis.

• Page four: Before Y'all Brainstorm

  Before You Brainstorm The UVC G3 Flex camera is designed to work with the UniFi Video® controller software (v3.ix.2 or college). The software may exist hosted on whatsoever of the following: • UniFi Application Server, model UAS‑XG • UniFi NVR, model UVC-NVR-2TB •...

• Folio 5: Hardware Overview

  Hardware Overview Microphone Camera Lens Low-cal Sensor Swivel Base of operations Microphone Microphone for recording audio Camera Lens Lens for viewing/recording video Light Sensor Sensor for ambience light Status indicator for the post-obit: LED State Status Alternating Device is busy; do not touch or unplug it. White/Blue This usually indicates that a process such equally a firmware upgrade is taking place.

• Page half-dozen: Lesser View

  Bottom View Ethernet Port Reset Button Ethernet Port The Ethernet Port is a 10/100 Mbps port used to supply power from a PoE 802.3af‑compliant switch to the photographic camera. The switch should be connected to a LAN running DHCP services and the UniFi Video Controller software. Reset Button The Reset Button is used to reset the photographic camera to manufacturing plant defaults.
• Page seven Desktop one. Remove the Indoor Mountain from the lesser of the camera. 2. Insert one end of the RJ‑45 cablevision into the Ethernet Port and the other end into a PoE 802.3af‑compliant switch. 3. Replace the Indoor Mount by lining up the notches with the slots on the camera base of operations and pressing it downward.
• Page 8 4. Place the camera on whatsoever apartment surface and adjust the viewing angle by: • Tilting the lens up or downwardly for vertical adjustment • Turning the base left or right for horizontal adjustment Wall 1. If the Ethernet cable is coming from the inside of a wall: a.
• Page nine 3. Connect the Ethernet cable to the Ethernet Port on the photographic camera. iv. Adhere the photographic camera to the Indoor Mount past lining up the notches with the slots on the lesser of the camera. Printing firmly until the photographic camera snaps on. Vertical Mounting Horizontal Mounting Pole...
• Page ten ii. Connect an Ethernet cable to the Ethernet Port on the G3 Flex camera. Note: If you lot are mounting the photographic camera outdoors, it must be installed in the upright position to prevent h2o from getting into the base of the camera. Apply the Outdoor Cover for boosted protection from moisture.
• Folio 11 3. Attach the camera to the Pole Mount by: a. Pressing the camera against the Pole Mount and lining upwardly the notches with the slots on the bottom of the photographic camera. b. Slide the photographic camera down onto the Pole Mount until it snaps into place.
• Page 12 5. Adjust the camera to the desired viewing angle by: • Tilting the lens upward or down for vertical adjustment • Turning the base left or right for horizontal adjustment Installation is complete.
• Page xiii UniFi Video Ensure that you lot are running UniFi Video software version 3.nine.two or newer. The latest version of the UniFi Video software is available at www.ubnt.com/download/unifivideo The UniFi Video auto-direction feature should automatically detect your new camera(due south). To manage the camera, perform the following steps: 1.

• Folio 14: Specifications

  Specifications UVC-G3-FLEX Ø 107.5 x 48 x 48 mm Dimensions (Ø four.23 x 1.89 x 1.89") Weight 170 g (5.99 oz) Sensor one/2.seven" 2‑Megapixel HDR Sensor Lens EFL 3.4mm / f1.2 Viewing Bending with Lens Distortion Correction (LDC) LDC Off 87.iv°...

• Page fifteen: Safety Notices

  Rubber Notices Read, follow, and keep these instructions. Heed all warnings. Simply employ attachments/accessories specified by the manufacturer. Alert: Hot Surface. Exercise not touch. Alarm: Practise non use this product in a location that tin be submerged by water. Alert: Avoid using this product during an electrical storm.

• Folio 16: Limited Warranty

  (VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti characterization(due south); or (VII) has non been received past Ubiquiti within 30 days of issuance of the RMA.

• Folio 17: Limitation Of Liability

  Discipline TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER Bug INHERENT IN THE Apply OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD Party PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, Data LOSS, CONTENT CORRUPTION, Bundle LOSS, OR OTHER DAMAGE RESULTING FROM Any OF THE FOREGOING.

• Page 18: Manufacture Canada

  Notation Some countries, states and provinces do not allow exclusions of unsaid warranties or conditions, and then the to a higher place exclusion may non apply to you. You may have other rights that vary from country to land, land to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may non apply to you.

• Page xix: Rohs/Weee Compliance Statement

  CE Marking CE marking on this product represents the production is in compliance with all directives that are applicative to information technology. RoHS/WEEE Compliance Argument English European Directive 2012/19/EU requires that the equipment bearing this symbol on the production and/or its packaging must not be disposed of with unsorted municipal waste.
• Page 20 Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.

• Folio 21: Proclamation Of Conformity

  Français [French] Le soussigné, UBIQUITI NETWORKS, déclare que l'équipement radioélectrique du blazon UVC-G3-FLEX est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: www.ubnt.com/compliance Deutsch [German] Hiermit erklärt UBIQUITI NETWORKS, dass der Funkanlagentyp UVC-G3-FLEX der...

• Folio 22: Online Resources

  Português [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rádio UVC-G3-FLEX está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: world wide web.ubnt.com/compliance Română...
• Folio 23 . u b northward t . c o one thousand ©2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi Video are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the Us and in other countries.

Share this post